0433 577 910

Bayside & South East Melbourne

Data Cabling Electricians

Structured cabling, network points, comms cabinets and security cabling for businesses and homes across Bayside and the south east.

  • Registered cabling, certified and test-reported
  • Runs planned around the ceiling you actually have
  • Done alongside the electrical, so the ceiling opens once
Call Us Now

Get Your Free Quote

Tell us about the job and we'll call you back today.

No obligation · Free quotes · Licensed REC 26681

Cabling Is the Part Nobody Sees and Everybody Blames

Get Your Free Quote

When a network is slow or a camera drops out, the cable is rarely the first thing anyone suspects and frequently the thing at fault. A run that is too long, a termination done in a hurry, cable pulled too hard around a corner, or data running alongside power for ten metres because it was the easy route.

None of that shows up on day one. It shows up as an intermittent problem two years later that three different people fail to diagnose.

Which is the argument for having the cabling done by someone who will be there to test it and hand you the results, rather than by whoever was closest to the ceiling hatch.

01 - Overview

What We Actually Do

Structured cabling for offices, tenancies, warehouses and homes: the runs, the outlets, the patch panel, the cabinet, and the testing that proves it works to spec rather than merely works today.

We do it as electricians, which matters more than it sounds. The same visit can cover the power for the equipment, the circuit the cabinet sits on, and the cabling itself, so the ceiling comes down once and there is one trade to coordinate rather than two blaming each other.

Our work here is the structured side: the runs, the outlets, the cabinet and the testing. Cabling that connects to the carrier’s telecommunications network is a separate ticket again, called ACMA cabling registration, and we will tell you up front if part of your job needs one.

The short version

  • Structured cabling, outlets, patch panels and comms cabinets
  • Security and camera cabling, including power over Ethernet runs
  • Certified and test-reported, not just terminated and assumed
  • Planned around the building, not around the shortest line on a plan
  • Done alongside the electrical work so the ceiling opens once

02 - What's included

Everything We Cover on the Job

01

Structured Cabling

Runs from the cabinet to each outlet, kept within the length limits for the category being installed and routed away from power where it has to be.

02

Outlets and Patching

Wall plates, floor boxes and desk outlets terminated properly, patched into the panel, and labelled at both ends so a fault is traceable.

03

Comms Cabinets

Wall or floor cabinets, mounted, powered on their own circuit, ventilated and tidy enough that the next person can work in them.

04

Security and Camera Cabling

Cabling for cameras, intercoms, access control and alarms, including power over Ethernet where the device supports it.

05

Testing and Certification

Every run tested and the results handed over. A cable that passes a link test is a cable you can rule out next time something goes wrong.

06

Additions to Existing Cabling

Extra outlets onto a system already in place, which usually means checking what is there before assuming it can be extended.

03 - Why it matters

Why Data and Power Should Not Share a Route

Running data cable alongside mains for any distance can induce interference into the data, and the symptom is not a dead link. It is a link that works, mostly, and degrades under load. That is the hardest kind of fault to chase, because everything tests fine when nothing is happening.

The wiring rules set out separation requirements for exactly this reason, and they are the sort of thing that gets ignored when a run is being improvised through a ceiling at four o’clock.

The other quiet one is length. Category cable has a maximum run length, and a route that goes the long way round a plant room can exceed it without anybody noticing. Testing catches it. Not testing means the building finds out later.

‘Nobody has ever called us about cabling on the day it was installed. They call two years later, and by then it is a mystery instead of a job.’

Peter, licensed electrician & owner

Sources AS/NZS 3000ACMA cabling rules

Why Carda

Why Choose Bayside's Carda Electrics?

Our team takes pride in our work - we genuinely love what we do. Good, old fashioned service is key to everything we do. We know that every project is important, regardless of its size, and you can have peace of mind knowing we have the expertise and experience to get your job done properly! Each job presents unique challenges, which is why we are always ready to think creatively to find a solution.

Genuine Service

Our team is always smiling because we genuinely love what we do. When you reach out to us, a friendly team member will be happy to assist you.

Licensed, Insured, Background Checked

Every electrician we hire is licensed, insured and background checked before they set foot on a job.

Transparent Pricing

No one likes a surprise bill. We'll let you know our costs upfront, and cut the guesswork out. Our team will listen to what you need and talk to you about which solution suits your situation before starting any work.

Respectful & Tidy

You can feel 100% assured that our team won't leave a mess behind. We bring our own cleaning products to make sure the job is completed properly and your premises are tidy.

Fast Responses

We value your time and make sure we show up on time. We'll also give you a courtesy call before we arrive, so you don't need to waste your day waiting for us to arrive.

Compliant Materials

We supply compliant materials from reputable suppliers, and we warrant what we supply.

What customers say

Reviewed by the People We've Worked For

Excellent

Based on 100 reviews

Google

Read all reviews

  • Karen Robb

    1 year ago

    Peter did a great job, installed points and 3-in-1 in my newly renovated bathroom. Very neat and professional. Thanks! Karen

  • Kelly Gooch

    1 year ago

    Great service. Fast and reliable fix on our light fittings. Cleaned up the mess and had it looking brand new in no time. Would definitely use the service again.

  • Aisling Molamphy

    1 year ago

    Peter recently carried out some work in my apartment. He was efficient, professional and very flexible with arranging times that suited me to get the work done. Highly recommend.

  • Lucy

    2 years ago

    Very happy with the service provided by Carda Electrics. Peter did a great job changing multiple light fittings for me, and was friendly, diligent and efficient. Highly recommend.

  • Sophie Cooper

    2 years ago

    I am so impressed with Peter from Carda. Our Paul Bacouse Oven element failed and need replacing Peter went above and beyond in sourcing a replacement and finding a solution. He kept me well informed and contacted me frequently until it was all fixed. I highly recommend Carda. Peter is an exemplary trades person.

  • Morgan Munro

    2 years ago

    Great service from Peter at Carda Electrics. From the high level of communication and professionalism to the understanding and care in regards to my repair… I can't recommend their services enough.

  • Pierre Zoghbi

    2 years ago

    Peter and George were professional and worked seamlessly throughout the day. The entire house lighting was changed and they even cleaned all the parts after the job was done. We hardly felt there presence. Thanks guys

  • Jenny Chen

    2 years ago

    Peter and his team did an outstanding job installing lights in my house. Brilliant service and well communicated. Peter is professional, responsive and efficient. Really pleased with the quality of work he's done for us - definitely recommend.

  • Luke Sgarbossa

    2 years ago

    A fantastic trades person, so happy I went with these guys. Nice person to deal with, did a fast and clean job, would highly recommend them to anyone

  • ethan

    1 year ago

    Peter is professional, efficient & helpful 10/10

04 - Our process

How a Cabling Job Runs

The work is mostly planning. Once the routes are settled and the cabinet position is agreed, pulling cable is the straightforward part.

Step 1

We Walk the Building

Where the cabinet goes, where the outlets are wanted, what routes exist above the ceiling, and what is already installed that can be reused.

Step 2

You Get a Fixed Price

Per outlet and per cabinet, with the cable category stated, so you can compare it against anything else you have been quoted.

Step 3

Installed, Tested, Handed Over

Cable pulled, terminated, patched, labelled at both ends, and every run tested with the results given to you.

05 - For landlords & property managers

For Landlords & Property Managers

If you manage tenanted property, you’re generally the one carrying the compliance obligation - and you’re usually hearing about problems second-hand from a tenant who just wants it fixed.

We can attend site, deal with the tenant directly, and report back to you with what was found, what was done and what it cost. Invoicing goes to you, scheduling goes through the tenant, and you get the compliance documentation for your records without having to be in the middle of every phone call.

06 - Where we work

Where We Work

We cover Bayside and the south east, with most jobs falling inside a 30-minute drive of Brighton.

BrightonSandringhamSt KildaHamptonElsternwickBentleigh + 16 more

07 - What it costs

What Data Cabling Costs

Cabling is quoted per outlet, which is the only unit that lets you compare quotes honestly. What moves the price is the route rather than the cable: an accessible suspended ceiling is quick, a concrete slab or a heritage building is not.

A cabinet is priced separately, and so is any electrical work the cabinet needs. We will tell you which parts of the quote are cabling and which are electrical rather than presenting one number.

No call-out surprises

Quotes are free and there's no charge for coming out to look at the job. You'll know what it costs before you decide whether to go ahead.

08 - FAQs

Frequently Asked Questions

Can't see yours? Call us on 0433 577 910.

Can you use the cabling that is already in the building?

Sometimes, and it is worth checking before ripping anything out. Older installations are often a usable category, and if the runs are in good condition and within length, re-terminating and testing them is far cheaper than replacing them. What decides it is the test results, not the age.

How many outlets do we actually need?

More than the number of desks, and fewer than most quotes suggest. The useful rule is to think about where equipment will be in five years rather than today, because adding a run later costs several times what adding it now does while the ceiling is already open. We will give you an opinion rather than just a number.

Do you do fibre as well as copper?

Tell us what the site needs and we will be straight about which parts are ours and which want a specialist. Most small commercial sites are copper from the cabinet out with fibre only on the incoming service, and that is well within normal work.

Is cabling work covered by an electrical licence?

Not by itself. Cabling that connects to the carrier’s telecommunications network in Australia has to be done by someone holding ACMA cabling registration, which is a different ticket from an electrical licence. Most internal network cabling does not touch it, and we will tell you up front if your job does.

Can you do it at the same time as the electrical work?

That is the sensible way to do it. The same ceiling has to come down for both, the cabinet needs a circuit anyway, and having one trade responsible for both removes the conversation where each blames the other. On a fitout it usually saves a week as well.

Are you licensed and insured?

Absolutely, our team of trusted electricians are fully licensed and insured. We have public liability insurance, and if required, just let our team know that you’d like to view our documentation.

Our team are NECA (National Electrical Contractors Association) accredited, which means they are trained to work safely and to current Victorian standards, and they keep that training current as the standards change.

We are strict about hiring. Every electrician who attends a job is licensed, experienced and background checked.

Can you issue a Certificate of Electrical Safety?

We can, and do. Our licensed electricians complete and sign a Certificate of Electrical Safety for the work that requires one, and lodge it with Energy Safe Victoria. It records that the work meets the wiring rules. You keep a copy for your own records, and it is worth filing: it is the document a buyer, insurer or property manager will ask for later.

Is it safe to attempt a DIY repair or should I call an electrician?

That really depends on one factor. Are you a licensed electrician?! If not, the answer is a simple, ‘No, don’t do it’. As tempting as it may be to save money, or use skills learnt elsewhere, electrical work carries huge risks and it’s just not worth attempting on your own.

Find a licensed team that is affordable, reliable and has the qualifications and experience to sort the problem out. If budget is a constraint, talk to us about what options we can provide. We offer highly competitive rates, efficient service timeframes and most of all, you can rely on the safety of our work.

Do you offer both residential and commercial electrical work?

We certainly do. We can help with electrical work for your home or business, whether it’s a new design and installation, during renovations or for regular servicing or maintenance. We work with clients right across the Bayside region of Melbourne, and Melbourne CBD, for everything from minor residential work through to large industrial installations.

Can you help install or repair internet and phone cables?

We certainly can help with this. Our electrical contractors have the necessary certifications and licenses to perform this type of electrical service, which are issued by the Australian Communications and Media Authority (ACMA). This type of licence shows that our team have completed the correct training to work with data cables, and that work will be carried out under the Australian Standards framework for wiring.

Can you assist with smoke alarm compliance?

We sure can. It’s imperative to ensure that your smoke alarms are serviced and maintained on a regular basis. We are able to install new systems, including smoke alarms, carbon monoxide detection systems and other systems to detect smoke and fire, but generally, we are called out to maintain existing systems. We can help you service your home system, and also provide services to realties and body corporates.

How often should I schedule an electrical safety inspection?

This really depends on the purpose of your safety inspection, as there are different guidelines for workplaces and homes. For some workplaces, testing will be required more than once a year. In your home, it’s worth doing an inspection every 5 years or so, but this can vary greatly depending on the age and history of the building.

We can provide a detailed check on residential properties or commercial electrical devices, cables, appliances, switchboards and wiring, to ensure your safety and also compliance. If you have a specific electrical problem, we can have a team member attend and perform testing and electrical fault finding, to identify the fault and the right way to fix it.

Can you assist with advice in reducing my energy usage?

We certainly can. Our fully licenced electricians and electrical contractors can give you advice and recommend solutions to increase your energy efficiency. There are many ways that most households can decrease their energy consumption. Common suggestions include installing energy-efficient lighting, using energy-efficient appliances and utilising timers and smart technology for lighting and other switches.

In some cases, large changes will be required for long-term benefits, but often it’s a number of small changes that will make the difference.

Get Started Today with a Free Quote

Tell us what the job involves and we'll come out, look at it properly, and put a fixed price in writing.

Get Your Free Quote 0433 577 910